Should You Look for Waterless Car Wash?

This is the deal...

You have probably heard about a waterless car wash or a dry car wash, but you hardly have no idea what it is! In this article, we'll cover the basics of a waterless car wash, the results you can achieve and how you can clean your car at home with little water in use.


1. What is a Waterless Car Wash?

A waterless car wash is an eco-friendly and effective car wash that uses little or no water. It is sometimes also known as a spray on car wash or no water car wash.


This is the best part It allows the car detailer to service your car in small spaces while saving amazing huge amounts of water.


Waterless products are more advanced than regular soap used for a car wash because they need to compensate for the lack of water. The efficiency of the waterless car wash is usually better than using water-based methods. Plus, when you are performing a waterless car wash, you only desire a bucket of water to rinse your towels rather than using between 50 to 100 gallons of fresh water when using a pressure hose wash.


2. How does a Waterless Car Wash work?

A waterless car wash uses high lubricity sprays to shine and wash the vehicle’s bodywork. The spray’s high lubricity chemicals encapsulate dirt and dust particles. This technique is similar to how water removes dirt, but the chemicals in waterless car wash are more efficient.


You simply spray on the surface of the car and then remove it off. This process removes any light dirt or stains from the car’s surface. This works for cars ideally that have no thick dried mud to clean. A waterless car wash is suggested for cars with light dirt.


Wiping down your car with a waterless car wash spray is advised by any car detailer as water can sometimes hurt your bodywork and leave marks if you go about it the wrong way. Yet, you have to have a good soft microfiber towels to wipe the car.

A microfiber towel is recommended because of its high absorbency and softness, which will scoop up dirt particles. If waterless car wash products applied correctly, it will not damage or scratch your car's paint.


3. Environmental Impact of a Waterless Car Wash

Many corner car washes use vast quantities of water as they drown the cars in water and soap them to remove as much dirt as possible (and as fast as possible!).

This is how much water is used to wash a sedan:


A hose and bucket wash at home: usually use 80-140 gallons of water per wash. Inevitably, you discharge soapy water, dust, and car oils into environment.


A commercial car wash: the majority of commercial car washes use up to 45 gallons of water per wash.


A waterless car wash: requires just a couple of bucket of water. In cases where cars caked in mud, you require an additional gallon of water.



4. Waterless Car Wash Products


Most professional mobile detailers use home-made products by mixing different types of high lubricity sprays together. We advise you not to do so unless you're a car detailing expert.



You better off buy a gallon of waterless car cleaner. The waterless car cleaner product may cost approximately $30 and will enable you to rinse your car 5 or 6 times. There are many popular car treatment brands like Meguiar's, Chemical Guys and 3D Auto Detailing Products that sell high-quality ready for use waterless car wash.


5. Waterless Car Wash Review

If you are just looking for a simple car wash to remove dirt and grime, a waterless car wash works fine. On the other hand, if you have thick embedded dirt on the vehicle, it might sometimes be better to apply a tiny amount of water on those areas so that you don’t use too much cleaner to soften the dirt. If you follow the steps properly, then you will not damage the paint of your car.

6. How You Can Do a Waterless Car Wash Yourself


To do a waterless car wash yourself at home, you should have many clean microfiber towels and a ready to use waterless car wash product. A low quality or dirty towel can damage your vehicle.


If your car has excessive mud, we recommend a rinse. A waterless car wash solution will not be effective against caked mud.


Here is a step-by-step guide to getting the car shiny at home!


Step 1: Start by taking a microfiber towel and folding it in half. Make sure the towels are clean before using them.


Step 2: Mentally split up your vehicle into different portions that you can work on at a time:


- The side windows - The roof - The hood and trunk - The side doors - The front bumper - The rear bumper - The wheels


You will want to use different microfiber clothes for different parts of the car. Stop using the cloth if it becomes too soiled. Improperly using a microfiber towel can cause scratches on your car. Never reuse a soiled microfiber without washing it first.


Step 3:

Generally, car detailers start at the top of the vehicle to avoid spilling when using products on the roof.

Simply spray the waterless car wash product on one folded cloth and onto a panel of the vehicle, gently wipe with leading cloth. And quickly buff by using a second clean and dry microfiber cloth.


Step 4:

Wipe lightly in one direction. Wipe the bodywork softly without applying too much pressure. Don’t go circles or you will end up keeping dirts on the car. We recommend wiping linearly in the direction of wind.


Step 5: When the towel gets too dirty, use another clean sides. The idea of using a clean part each time is not to reintroduce the dirt on the car again. Continue by repeating this process as you clean the other parts of the vehicle.



Conclusion

We believe waterless car washes are the future. Encourage your local washer to wash your car without water and see the incredible results for yourself!



Recent Posts
Follow Us
  • Facebook Basic Square
  • Twitter Basic Square
  • Google+ Basic Square